• SY VC12-2  5V/2A Gun type Charger

SY VC12-2 5V/2A Gun type Charger

Model : SY VC12-2
1. Dimension/物理尺寸  
110mm X40mm X20mm (L* W * H ).

2. Weight/重量
The weight of the power supply shall be about 103g.
電源的重量大約為103g.

3. Electrical Specification/電氣特性
3.1  Input Characteristics/輸入特性
    3.1.1. Input Voltage 輸入電壓
The range of input voltage is from 12VDC to 24VDC. 輸入電壓範圍:從12VDC到24VDC. 
    3.1.2.Input DC Current/DC 輸入電流
       1.2A max. @ 12Vdc input & Full load/滿載
    3.1.3. Inrush Current (cold start)/浪湧電流(冷啟動) 
       2A max. @ 12Vdc input 
    3.1.4. Efficiency (Normal)/效率(額定輸入) 
       80% min. @ (type 80% at input 12VDC)& Full load/(在10VDC輸入,典型效率80%)&滿載 
3.2  Output Characteristics/輸出特性
    3.2.1Static Output Characteristics /靜態輸出
Protection Requirements/保護要求

4.1  Over Current Protection/過流保護
The output shall hiccup(2.5A-3.1A) when the over currents applied to the output rail, and shall be self-recovery when the fault condition is removed
當過電流(2.5A-3.1A)時,輸出將進入打嗝模式,當過流情況解除後,產品將會自動恢復正常

4.2. Short Circuit Protection/短路保護
          The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed
當輸出短路時,產品輸入功率降低且不會損傷,當短路情況解除後,產品將會自動恢復正常 

5.Environment Requirements/環境要求
   5.1. Operating Temperature and Relative Humidity/操作溫/濕度要求
0℃ to +40℃
5%RH to 95%RH(Non-condensing)
   5.2.  Storage Temperature and Relative Humidity/存儲溫/濕度要求
-20℃ to +65℃
0%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet/低於10,000英
   5.3.Vibration/振動
10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, 
掃描頻率: 10 to 300Hz, 加速度: 1.0G(位移: 3.5mm), X, Y, Z三垂直坐標軸向各振動1小時

6.Reliability Requirements/可靠性要求
6.1 Burn-in/煲機
The power supply shall under go a minimum of 4 Hours burn-in test at 40℃ 5℃ under full load condition
產品至少要在40℃ 5℃的環境及滿載條件下煲機2小時
1. Dimension/物理尺寸  
110mm X40mm X20mm (L* W * H ).

2. Weight/重量
The weight of the power supply shall be about 103g.
電源的重量大約為103g.

3. Electrical Specification/電氣特性
3.1  Input Characteristics/輸入特性
    3.1.1. Input Voltage 輸入電壓
The range of input voltage is from 12VDC to 24VDC. 輸入電壓範圍:從12VDC到24VDC. 
    3.1.2.Input DC Current/DC 輸入電流
       1.2A max. @ 12Vdc input & Full load/滿載
    3.1.3. Inrush Current (cold start)/浪湧電流(冷啟動) 
       2A max. @ 12Vdc input 
    3.1.4. Efficiency (Normal)/效率(額定輸入) 
       80% min. @ (type 80% at input 12VDC)& Full load/(在10VDC輸入,典型效率80%)&滿載 
3.2  Output Characteristics/輸出特性
    3.2.1Static Output Characteristics /靜態輸出
Protection Requirements/保護要求

4.1  Over Current Protection/過流保護
The output shall hiccup(2.5A-3.1A) when the over currents applied to the output rail, and shall be self-recovery when the fault condition is removed
當過電流(2.5A-3.1A)時,輸出將進入打嗝模式,當過流情況解除後,產品將會自動恢復正常

4.2. Short Circuit Protection/短路保護
          The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed
當輸出短路時,產品輸入功率降低且不會損傷,當短路情況解除後,產品將會自動恢復正常 

5.Environment Requirements/環境要求
   5.1. Operating Temperature and Relative Humidity/操作溫/濕度要求
0℃ to +40℃
5%RH to 95%RH(Non-condensing)
   5.2.  Storage Temperature and Relative Humidity/存儲溫/濕度要求
-20℃ to +65℃
0%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet/低於10,000英
   5.3.Vibration/振動
10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, 
掃描頻率: 10 to 300Hz, 加速度: 1.0G(位移: 3.5mm), X, Y, Z三垂直坐標軸向各振動1小時

6.Reliability Requirements/可靠性要求
6.1 Burn-in/煲機
The power supply shall under go a minimum of 4 Hours burn-in test at 40℃ 5℃ under full load condition
產品至少要在40℃ 5℃的環境及滿載條件下煲機2小時
1. Dimension/物理尺寸  
110mm X40mm X20mm (L* W * H ).

2. Weight/重量
The weight of the power supply shall be about 103g.
電源的重量大約為103g.

3. Electrical Specification/電氣特性
3.1  Input Characteristics/輸入特性
    3.1.1. Input Voltage 輸入電壓
The range of input voltage is from 12VDC to 24VDC. 輸入電壓範圍:從12VDC到24VDC. 
    3.1.2.Input DC Current/DC 輸入電流
       1.2A max. @ 12Vdc input & Full load/滿載
    3.1.3. Inrush Current (cold start)/浪湧電流(冷啟動) 
       2A max. @ 12Vdc input 
    3.1.4. Efficiency (Normal)/效率(額定輸入) 
       80% min. @ (type 80% at input 12VDC)& Full load/(在10VDC輸入,典型效率80%)&滿載 
3.2  Output Characteristics/輸出特性
    3.2.1Static Output Characteristics /靜態輸出
Protection Requirements/保護要求

4.1  Over Current Protection/過流保護
The output shall hiccup(2.5A-3.1A) when the over currents applied to the output rail, and shall be self-recovery when the fault condition is removed
當過電流(2.5A-3.1A)時,輸出將進入打嗝模式,當過流情況解除後,產品將會自動恢復正常

4.2. Short Circuit Protection/短路保護
          The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed
當輸出短路時,產品輸入功率降低且不會損傷,當短路情況解除後,產品將會自動恢復正常 

5.Environment Requirements/環境要求
   5.1. Operating Temperature and Relative Humidity/操作溫/濕度要求
0℃ to +40℃
5%RH to 95%RH(Non-condensing)
   5.2.  Storage Temperature and Relative Humidity/存儲溫/濕度要求
-20℃ to +65℃
0%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet/低於10,000英
   5.3.Vibration/振動
10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, 
掃描頻率: 10 to 300Hz, 加速度: 1.0G(位移: 3.5mm), X, Y, Z三垂直坐標軸向各振動1小時

6.Reliability Requirements/可靠性要求
6.1 Burn-in/煲機
The power supply shall under go a minimum of 4 Hours burn-in test at 40℃ 5℃ under full load condition
產品至少要在40℃ 5℃的環境及滿載條件下煲機2小時
Car Charger

Related Products

SY VC12-15V/2A Charger

SY VC12-15V/2A Charger

SY CP 0111 Charger

SY CP 0111 Charger

© 2022 Shengyih Technologies Co., Ltd All rights reserved.